1-2KHZ Adaptive Inverter Dc Robot Dedicated EleCtric Servo Spot Welder

1-2KHZ Adaptive Inverter Dc Robot Dedicated EleCtric Servo Spot Welder

Product introduction:

Inverter DC spot welding machine with a frequency of one kilohertz to two kilohertz, the response speed of welding is (0.5ms), 20 times faster than the power frequency (10ms), which increases the heating speed and reduces the welding time. The output current is similar to DC, the heat is concentrated, the plastic ring is formed well, and the welding spatter is greatly reduced. The solder joints of the solder joints have good consistency. The spot welding machine adopts all-digital power supply and adopts high-speed DSP microprocessor, which has strong information processing capability. The adaptive function is added to the control system, and the adaptive space is large. A welding tong can be adapted to different thicknesses in one station. The welding requirements of the sheet have a wide range of applications, which can be adapted to the welding of ordinary cold-rolled sheets, galvanized sheets, thermoformed sheets, high-strength sheets and aluminum sheets.

This product has the following characteristics:

1. The transformer is small in size and light in weight, which not only realizes the integration of the transformer and the welding tongs, but also helps to reduce the overall weight of the robotic welding tongs.

2. The welder controller adds an adaptive system. A welding tong can weld a variety of solder joints of different thicknesses at the same station.

3. Welding caliper servo electric cylinder The hollow motor developed by our company can be used, or the electric cylinder provided by the robot manufacturer can be used.

The hollow motor uses a planetary roller screw and its service life is 5-10 times that of a normal ball screw. The electric cylinder structure produced by our company is reasonable in design, low in noise, strong in rigidity, long in service life, simple in maintenance, and can also reduce the weight and volume of the welding tongs.

4. Obtained a number of patented robotic welding tongs, purchased aerospace aluminum processing, good rigidity, high strength, small deformation, and played a very good role in improving welding quality.

5, welding host and robot communication can be applied to a variety of communication protocols, but also can be configured according to user requirements, personalized communication module.

6. Welding tongs can be connected with industrial robots produced by our company, and can also be connected with various robots at home and abroad such as FANUC, Yaskawa, KUKA, ABB, Xinsong, Eft, and Guangzhou CNC.